Special Features:

Item is 29 inches long; 1.9375 wide; 0.5625 high at the highest point; has two tear drop shaped bubbles one on each side that are 0.781 wide, that are attached to the based at the outside edge but not in the center; tensile strength 1800 psi min; elongation 400 percent min; t.O. 35d3-11-52-4 figure 2-11 index 73

Properties:

An item fabricated from nonmetallic special shaped section. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.