Model: M20708/20-01C

Transmitter Synchro
Description:

Steel, corrosion resisting body material, standard round c body style, 1.3115 inches shoulder diameter, 0.8745 inches pilot diameter.

Properties:

Body Material
Steel, corrosion resisting
Body Style
Standard round c
Shoulder Diameter
Between 1.3115 inches and 1.3120 inches
Pilot Diameter
Between 0.8745 inches and 0.8750 inches
Overall Length
3.0630 inches
Flange Diameter
Between 1.4320 inches and 1.4370 inches
Flange Thickness
0.0930 inches
Undercut Diameter
1.3120 inches
Undercut Width
0.0780 inches
Shaft Diameter
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length
0.5400 inches single shaft
Fragility Factor
Moderately rugged
Maximum Tempurature Rise
20.0 degrees celsius
Body Size
15
Rotor Input Voltage Rating In Volts
115.0
Frequency In Hertz
60.0
Rotor Input Current Rating
22.0 milliamperes
Rotor Input Electrical Power Rating
360.0 milliwatts
Zro Impedance Magnitude In Ohms
Between 5335.00 and 6265.00
Zro Impedance Angle In Deg
Between 80.00 and 83.00
Zss Impedance Magnitude In Ohms
Between 675.00 and 825.00
Zss Impedance Angle In Deg
Between 11.00 and 16.00
Phase Shift Angle In Deg
7.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
45.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
90.00
Electrical Error Angular Range In Minutes
-6.0 to 6.0
Spline Tooth Quantity
21 single shaft
Torque Gradient Per Angular Deg
0.050 inch-ounces
Alignment Hole Quantity
4
Pilot Length
0.0400 inches
Shoulder Length
0.1320 inches
Mounting Surface To Terminal End Distance
2.5230 inches
Spline Tooth Diametral Pitch
120 single shaft
Shaft Thread Series Designator
Unf single shaft
Shaft Thread Direction
Right-hand single shaft
Shaft Thread Class
2a single shaft
Terminal Location
Rear
Shaft Thread Length
0.1850 inches single shaft
Shaft Type
Spline w/threads single shaft
Alignment Hole Depth
0.1250 inches
Transformation Ratio
0.783 rotor to stator
Alignment Hole Bolt Circle Diameter
1.1000 inches
Shaft Thread Size
0.190 inches single shaft
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
5 screw
Specification Data
81349-mil-s-20708/20 government specification
NSN
5990-00-018-9723
Part Number
M20708/20-01C
Description
Synchro,transmitter
CAGE
81343

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.

Part M20708/20-01C NSN 5990-00-018-9723

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
02073
FIIG:
A07800
Concept No.:
1
App. Key:
H
Cond. Code:
1
Status:
A

Material Classification

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
MMAC:
EH
CRITL:
X

Packaging & Shipping

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
1.0000lbs
Item Weight:
--
Item Dim:
--
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q

Freight Classification

NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
NMFC:
062120
UFC:
34760
LTL:
RATING VARIABLE
LCL:
--
WCC:
593
TCC:
Z
SHC:
9
ACC:
Instruments/Radio

End Items End applications NSN 5990-00-018-9723 is a component of

  • An/srq-4 Radio Terminal Set
  • Mk-23 (mods 1-8) Target Acquisition System
  • Ticonderoga Class Cg (47)
  • Spruance Class Dd (963)
  • Forrestal Class Cv
  • Nimitz Class Cvn
  • Arleigh Burke Class Ddg
  • Oliver Perry Class Ffg
  • Seawolf Class Ssn

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

How to Order  

Ordering from buyaircraftparts.com

If you would like to order this transmitter synchro (NSN 5990-00-018-9723) please submit the pricing and availability form above to receive an up to date quote by email. If you agree to the pricing and terms you can e-sign your order online!

We are pleased to have the opportunity to serve you.

Have a Question

Hours: 08:00-18:00 Eastern Standard Time
Phone: +1 470-231-0824
Email: Contact Form »
Schedule B and Export
  • Schedule B: 9014900000
  • SITC: 87412
  • End Use: Marine engines, parts
  • NAICS: 334511
  • USDA: 1

Freight Class: Parts & accessories for direction finding compasses and other navigational instruments and appliances

Highest Rated Parts
Recently Purchased Parts
Hot Parts