NSN 5330-01-445-9143

Gasket
DEMIL
Shelf Life
UOM
NIIN
Demil:
NO
Shelf Life:
240 mo.
UOM:
1 EA
NIIN:
014459143

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

Inventory

 

This product may be available in the following quantities and conditions.

  • NS: 1

Please note that inventory for this NSN was updated 04/29/2024 and may have changed since then. Request a quote for up to date pricing and availability.

Product Definition Definition of approved item name (AIN): "GASKET"

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. Excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

5330-01-445-9143 Spec. NSN part characteristics

MRC
Name
Detail
MRC:
AAGR
Cross Sectional Shape
Solid single or composition
MRC:
ABHP
Overall Length
36.000 inches
MRC:
ABMK
Overall Width
0.500 inches
MRC:
ADVM
Cross-sectional Thickness
0.125 inches
MRC:
CRTL
Criticality Code Justification
Zzzy
MRC:
FEAT
Special Features
Provide pressure sensitive adhesive with protective back on side indicated
MRC:
MATT
Material
Rubber silicone class q
MRC:
MDCL
Material Specification
Ams 3195 assn standard single material response
MRC:
SPCL
Special Test Features
Special quality control testing
MRC:
TEST
Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
ZZZY
Reference Number Differentiating Characteristics
As differentiated by material which must conform to ships parts control center special quality control provisions

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
32-1973-18
Cage Code:
27192
RNCC:
3
RNVC:
1
DAC:
A
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
LL-HX0-5232
Cage Code:
14153
RNCC:
5
RNVC:
9
DAC:
9
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Indicates a design/source control reference item
Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
04522
FIIG:
A032A0
Concept No.:
App. Key:
AB
Cond. Code:
1
Status:
A

Special material and handling

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
P
PMIC:
A
ESD:
ESD:
ADPE:
0
CRITL:
S
Hazmat (HMIC) P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality S

The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.

National motor freight and handling

NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
194050
NMF Description:
Gaskets/rings Plumbing Fixtures
UFC:
78100
LTL:
70.0
LCL:
--
WCC:
596
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 596

Gaskets, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)